This kit goes together
like a dream............until you come to the spear.
The problem
is it's so long and if you want it in the position that my
Predator
is holding it, then when the vinyl gets warm it droops
at the ends.
To get around this you could position it going
straight up, but I didn't want
to be restricted by
this........so. I drilled the thicker parts of the spear with a
fine drill and then inserted metal rods to strengthen them, this
is pretty tricky
as you need to go about 2" into the vinyl
shaft, so mind those fingers as you'll
have to hold the
spear by hand. Once done though it gives you many more
options
for positioning the arm and hand that hold it.
|